4
e) Power tools require maintenance. Check power tools for e) Keep your workplace clean and tidy. Material mixtures are
concentricity or jamming of moving parts, any cracks and all
extremely dangerous. Light metal dusts can ignite or explode.
other factors affecting the power tool work safety. If any
f) Protect the object machined. Make sure all clamps are closed and
damage to the power tool is detected, it should be repaired
check for excessive clearance. It is safer to fix the object machined in a
before use. Improper power tool maintenance is a reason for many
fixing device or a vice than holding it in your hand.
accidents.
f) Cutting tools should be sharp and clean. Keeping sharp cutting
edges in good condition reduces the risk of jamming and facilitates
operation.
g) Power tools, equipment, working tools etc. should be used
according to this user's manual taking into account
operating conditions and the work to be done. Misusing a
power tool can result in dangerous situations.
h) At low temperatures and after a long brakes in operation it is
recommended to turn the power tool to operate it with no
load for a few minutes to provide proper grease distribution
inside its driving mechanism.
i) Use soft, damp (cannot be wet) cloth and soap to clean power
tools. Do not use petrol, solvents and other agents that may
damage your equipment.
j) Power tools can be stored/carried after making sure that all
moving components are locked and protected against
release with original devices intended for this purpose.
k) Store power tools in a dry, dust and water-protected place.
l) Carry your power tool in its original packaging to provide
APPLICATIONS AND CONSTRUCTION:
protection against mechanical damage.
The drill is intended for drilling holes in wood, metal, plastics and
ceramics; its mode is used to drill in bricks, stone and concrete.
WARNING! General warnings regarding the use of
The tool is equipped with an electronic control system and right-
power tools.
hand/left-hand operation switch and is also suitable for
Repair:
tightening/undoing screws and threading.
It is absolutely prohibited to use the tool in other applications.
The drill is powered by a single-phase electric motor and is
intended for use in DIY under average load. It is not suitable for heavy
duty tasks. It is prohibited to use the tool to carry out operations
that require using professional equipment.
WARNING! IMPACT DRILL, Additional Safety
Warnings
Personal Safety:
a) Wear ear protectors with impact drills. Exposure to noise can
cause hearing loss.
b) Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory
contacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
c) Use appropriate detectors to determine if utility lines are
hidden in the work area or call the local utility company for
assistance. Contact with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explosion. Penetrating a water
line causes property damage or may cause an electric shock.
- Touching the rotating drill bit with the hand, operator's clothes or
power cord.
d) Do not work materials containing asbestos. Asbestos is
considered carcinogenic.
- Burns when changing drill bits (Drill bits heat up intensely during
a) Power tools can be repaired by competent persons only who
use original spare parts. It will provide safe operation for the power
tool.
WARNING!
While operating power tools it is necessary to observe basic
work safety rules to avoid fire, electric shock or mechanical
injury.
g) Use auxiliary handles supplied with the tool. Loss of control can
cause personal injury.
h) Always hold firmly the power tool with your both hands
using both the main and auxiliary handle keeping a stable
position. It is safer to control your power tool with both hands.
i) Turn the power tool immediately when the bit jams. Expect
intense vibrations that can result in a kickoff. The bit jams
when the power tool is overloaded or is bent inside the object.
j) Always unplug the tool from the mains socket during breaks,
prior to changing bits, during repairs, cleaning or making
adjustments. Before you put the power tool aside make sure
it is completely stopped. The bit can jam resulting in losing control
over the power tool.
k) Do not use a power tool with its power cord damaged. Do not
touch the power cord when damaged; in case of damaging
the power cord during operation unplug it from the mains.
Damaged power cords increase the risk of electric shock.
l) If the power cord is damaged, it must be replaced with a
special cord available from an authorized service center.
impact
impact
impact
–
Despite using the tool according to its intended application it is
impossible to eliminate certain residual risk factors. Considering the tool
construction the following risks may occur when operating the tool:
Each application of the tool not in line with the intended use as specified
below is strictly forbidden and makes the warranty terms null and void.
The manufacturer shall not be held responsible for possible
consequential damage that may arise due to or in connection with such
application.
Any modifications of the tool by the user relieve the manufacturer from
responsibility for any damage and injuries to the user and the
surroundings.
Application of the tool in accordance with the intended use also refers to
its maintenance, storage, transportation and repairs.
Defective electric tools can be handed over for repairs exclusively to
service workshops appointed by the tool manufacturer. The tools
supplied from electric grid shall be repaired exclusively by authorized
electricians.
Zapojte se do konverzace o tomto výrobku
Zde můžete sdílet, co si myslíte o Tryton TDW1050 Vrtací kladivo. Máte-li dotaz, nejprve si pozorně přečtěte návod. Žádost o příručku lze provést pomocí našeho kontaktního formuláře.