HP6360 4203 000 309312 ENGLISH
General Description (fig. 1)
.
A Precision cutting element
B Comb
C Hair length selector
D On/off slide
E Cleaning brush
F Socket for appliance plug
G Charging light
H Adapter
I Appliance plug
Important
.
Read these instructions for use carefully before using
the appliance and save them for future reference.
◗ Check if the mains voltage indicated on the
adapter corresponds to the local mains voltage
before you connect the appliance.
◗ This appliance is suitable for mains voltages
from 220 to 240 volts.
◗ Only use the adapter supplied.
◗ The adapter contains a transformer. Do not cut
off the adapter to replace it with another plug,
as this will cause a hazardous situation.
◗ Do not use a damaged adapter.
◗ If the adapter is damaged, always have it
replaced by one of the original type in order to
avoid a hazard.
◗ Keep the appliance and the adapter dry.
◗ This appliance is only intended for trimming
human hair. Do not use it for any other
purpose.
◗ Charge, store and use the appliance at a
temperature between 15cC and 35cC.
◗ Keep the appliance out of the reach of children.
◗ Noiselevel: L= 70.1 dB(A)
Charging
.
Charging this appliance takes 10 hours.
A fully charged appliance has a cordless trimming
time of up to 40 minutes.
Do not leave the appliance connected to the
mains for more than 24 hours.
1 Make sure the appliance is switched off before
you start charging it.
2 Insert the appliance plug into the appliance (fig.
2).
3 Insert the adapter into the wall socket.
◗ As soon as you put the adapter in the wall
socket to charge the appliance, the green
charging light goes on (fig. 3).
4 If the battery is empty and you want to trim
your bikini line, charge the appliance for at least
1.5 hours to have enough power for one
trimming session.
Optimising the lifetime of the battery
- We advise you to use the appliance the first 2 to
3 times until the battery is completely empty
before recharging it again.
- Do not recharge the appliance in between
trimming sessions.
- Discharge the battery completely twice a year by
letting the motor run until it stops.
Using the appliance
.
Remove the appliance plug from the appliance
before you start trimming or styling.
Do not press the appliance too firmly onto the skin
and stretch the skin with your free hand during
trimming or styling.
Do not move the appliance too fast. Make smooth
and gentle movements.
Trimming with the comb
Use the comb to trim your bikini line.
Hair length settings
The adjustable comb with 5 settings allows you to
cut hair to 5 different lengths:
◗ Settings 1-5: resulting in a hair length of approx.
5-9 mm.
◗ The resulting hair length corresponds to the
smallest distance between the cutting blade and
the spot where the comb is in contact with the
skin (fig. 4).
Start at the setting for maximum hair length (setting
5) to familiarise yourself with the trimmer.
1 Slide the comb to the desired hair length setting
(fig. 5).
The setting selected is indicated by the arrow.
2 Switch the appliance on by pushing the on/off
slide upwards to position I.
3 Move the trimmer against the direction of hair
growth. Make sure the surface of the comb
always stays in contact with the skin. Hold the
appliance in such a way that the orchid is
pointing upwards (fig. 6).
◗ If the comb becomes detached from the hair
length selector, simply reattach it (fig. 7).
Styling with the precision cutting element
Use the precision cutting element to style your bikini
line.
To style your bikini line, hold the appliance with the
orchid pointing towards your skin.
1 Slide the hair length selector to position 0. This
will retract the comb to a position below the
cutting element (fig. 8).
Styling with retracted comb will result in a hair
length of approx. 1 mm.
2 Switch the appliance on by pushing the on/off
slide upwards to position I.
3 Move the appliance towards the desired
contour of your bikini line. Touch the hair
lightly with the precision cutting element (fig.
9).
You can be as creative as you like when styling your
bikini line. You can use the template on the
packaging to create a shape, but you can also make
your own templates to create a personal style.
Cleaning
.
Do not use abrasives, scourers or liquids such as
alcohol, petrol or acetone to clean the appliance.
Do not immerse the appliance in water.
1 Switch the appliance off, pull the adapter out of
the wall socket and pull the appliance plug out
of the appliance before you start cleaning the
appliance.
2 Pull the cutting element in the direction of the
arrow to remove it (fig. 10).
Be careful: do not let the cutting element fall to the
floor!
3 Clean the cutting element, the cavity under the
cutting element and the comb with the brush
supplied.
Zapojte se do konverzace o tomto výrobku
Zde můžete sdílet, co si myslíte o Philips HP6360 Bikini zastřihovač. Máte-li dotaz, nejprve si pozorně přečtěte návod. Žádost o příručku lze provést pomocí našeho kontaktního formuláře.