Manuál Indesit IWSNE 61253CECO EU.L Pračka

Manuál

2

GB

Installation

! This instruction manual should be kept in a safe

place for future reference. If the washing machine

is sold, transferred or moved, make sure that the

instruction manual remains with the machine so

that the new owner is able to familiarise himself/

herself with its operation and features.

! Read these instructions carefully: they contain

vital information relating to the safe installation

and operation of the appliance.

Unpacking and levelling

Unpacking

1. Remove the washing machine from its packaging.

2. Make sure that the washing machine has

not been damaged during the transportation

process. If it has been damaged, contact the

retailer and do not proceed any further with the

installation process.

3. Remove the 4 protec-

tive screws (used during

transportation) and the

rubber washer with the

corresponding spacer,

located on the rear part of

the appliance (see figure).

4. Close off the holes

using the plastic plugs

provided.

5. Keep all the parts in a safe place: you will need

them again if the washing machine needs to be

moved to another location.

! Packaging materials should not be used as

toys for children.

Levelling

1. Install the washing machine on a flat sturdy

floor, without resting it up against walls, furniture

cabinets or anything else.

2. If the floor is not per-

fectly level, compensa-

te for any unevenness

by tightening or loo-

sening the adjustable

front feet (see figure);

the angle of inclination,

measured in relation to

the worktop, must not

exceed 2°.

Levelling the machine

correctly will provide it with stability, help to avoid

vibrations and excessive noise and prevent it

from shifting while it is operating. If it is placed on

carpet or a rug, adjust the feet in such a way as

to allow a sufficient ventilation space underneath

the washing machine.

Connecting the electricity and

water supplies

Connecting the water inlet hose

1. Insert seal A into

the end of the inlet

hose and screw the

latter onto a cold wa-

ter tap with a 3/4 gas

threaded mouth (see

figure).

Before making the

connection, allow the

water to run freely un-

til it is perfectly clear.

2. Connect the inlet

hose to the washing

machine by screwing

it onto the correspon-

ding water inlet of the

appliance, which is

situated on the top

right-hand side of the

rear part of the ap-

pliance (see figure).

3. Make sure that the hose is not folded over

or bent.

! The water pressure at the tap must fall within

the values indicated in the Technical details

table (see next page).

! If the inlet hose is not long enough, contact a

specialised shop or an authorised technician.

! Never use second-hand hoses.

! Use the ones supplied with the machine.

A

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu Indesit IWSNE 61253CECO EU.L Pračka papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Indesit. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Indesit IWSNE 61253CECO EU.L Pračka v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro Indesit Pračky
Další manuály Pračky

Často kladené otázky o Indesit IWSNE 61253CECO EU.L Pračka

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

Indesit MTWSA 51051 W EE Pračka

Manuál

Indesit BWE 91284X WSSS EU Pračka

Manuál

Indesit IWC 81051 C ECO EU.M Pračka

Manuál

Indesit IWSNC 51051 X9 EU Pračka

Manuál

Indesit BWE 81285X W EE N Pračka

Manuál

Indesit EWE 81484 B EU Pračka

Manuál

Indesit MTWE 61283 WK EE Pračka

Manuál

Indesit BWSE 71295X WSV EU Pračka

Související kategorie