Manuál Florabest IAN 270730 Motorová pila

Manuál

13

GB

• Kickback may occur when the nose or

tip of the guide bar touches an object, or

when the wood closes in and pinches the

saw chain in the cut

(cf. image 1/g. B).

• Tip contact in some cases may cause

a sudden reverse reaction, kicking the

guide bar up and back towards the op-

erator (cf. image 1/g. A).

• Pinching the saw chain along the top of

the guide bar may push the guide bar

rapidly back towards the operator.

• Either of these reactions may cause

you to lose control of the saw which

could result in serious personal injury.

Do not rely exclusively upon the safety

devices built into your saw. As a chain

saw user, you should take several steps

to keep your cutting jobs free from ac-

cident or injury.

Kickback is the result of tool misuse and/

or incorrect operating procedures or condi-

tions and can be avoided by taking proper

precautions as given below:

• Maintain a rm grip, with thumbs

and ngers encircling the chain

saw handles, with both hands on

the saw and position your body

and arm to allow you to resist

kickback forces. Kickback forces can

be controlled by the operator, if proper

precautions are taken. Do not let go of

the chain saw.

• Do not overreach and do not cut

above shoulder height. This helps

prevent unintended tip contact and ena-

bles better control of the chain saw in

unexpected situations.

• Only use replacement bars and

chains specied by the manufac-

turer. Incorrect replacement bars and

chains may cause chain breakage and/

or kickback.

• Follow the manufacturer´s sharp-

ening and maintenance instruc-

tions for the saw chain. Decreasing

the depth gauge height can lead to

increased kickback.

Further safety directions

• If the supply cord of this power tool is

damaged, it must be replaced by a spe-

cially prepared cord available through

the service organization.

• If it is necessary to replace the connec-

tion cable, we recommend that this be

performed by the manufacturer or an

authorised representative (e.g. authorised

workshop, customer service, etc.).

• Lay the extension cable in such a way

that it will not be caught by branches

or similar during sawing.

• Use a surge protector with a release cur-

rent of 30 mA or less.

• Comply carefully with maintenance,

control and service instructions in

this manual. Damaged protective de-

vices and parts have to be repared or

changed except as noted otherwise in

this manual.

Operation startup

Always wear protective

gloves when working with

the chainsaw and employ

only original parts. Pull out

the power plug before doing

any work on the chainsaw

itself -– injury hazard!

IB-270730-FKS_2200_E3-CB4-03112015-rev03-ts.indb 13 05.11.15 16:08

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu Florabest IAN 270730 Motorová pila papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Florabest. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Florabest IAN 270730 Motorová pila v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro Florabest Motorové pily
Další manuály Motorové pily

Často kladené otázky o Florabest IAN 270730 Motorová pila

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

Florabest IAN 291822 Motorová pila

Manuál

Florabest IAN 292285 Motorová pila

Manuál

Florabest FAHE 18 B2 Motorová pila

Manuál

Florabest FBKS 52 A1 Motorová pila

Manuál

Florabest IAN 68655 Motorová pila

Manuál

Florabest IAN 64606 Motorová pila

Manuál

Florabest IAN 56393 Motorová pila

Manuál

Florabest IAN 285178 Motorová pila

Související kategorie