Manuál EMOS E8825 Meteostanice

Manuál

5

5. Set the required sensor channel number (1, 2, 3) by repeatedly pressing the CH button located in

the battery compartment of the sensor. The channel number will be shown on the sensor's display.

Data from the sensor will be loaded into the station within 3 minutes.

6. If the sensor signal is not detected, remove the batteries and reinsert them.

Displaying Data from Multiple Sensors, Automatic Cycling through Values from

Connected Sensors

Press the button repeatedly to display data from all connected sensors on the weather station,

one by one.

You can also activate automatic cycling through data from all connected sensors:

1. Turning on cycling

Repeatedly press the

button until the display shows the icon.

Data from all connected sensors will be shown automatically and repeatedly on the station's display

one after another.

2. Turning o cycling

Repeatedly press the

button until the icon disappears.

Radio Controlled Clock (DCF77)

After being registered by the wireless sensor, the weather station will automatically search for DCF77

signal (hereinafter referred to as DCF) for 7 minutes; the

icon will ash depending on the strength

of DCF signal.

No other data on the display will be updated and all buttons except for

will be disabled during

the search.

Short pressing the button terminates the search for DCF signal.

Signal detected - the icon stops ashing and the current time and date will be displayed with the icon.

Signal not detected – DCF icon will not be displayed.

To repeat the search for DCF signal for 7 minutes, long press the button; to cancel the search for

DCF signal, short press the button again. DCF signal will be continuously synchronised every day.

During summer time, the icon will be displayed in eld 5.

In normal conditions (at a safe distance from sources of interference, such as television sets or computer

monitors) the detection of time signal takes several minutes.

If the weather station does not detect the signal, follow these steps:

1. Move the weather station to another location and try to detect the DCF signal again.

2. Check the distance of the clock from the sources of interference (computer monitors or television

sets). It should be at least 1.5 to 2 m during the reception of the signal.

3. When receiving DCF signal, do not put the weather station in the proximity of metal doors, window

frames and other metal structures or objects (washing machines, dryers, refrigerators etc.).

4. In reinforced concrete structures (cellars, high-rise buildings, etc.), the DCF signal reception is

weaker, depending on the conditions.

In extreme cases, place the weather station close to a window toward the transmitter.

Reception of DCF radio signal is aected by the following factors:

• thick walls and insulation, basements and cellars

• inadequate local geographical conditions (these are dicult to assess in advance)

• atmospheric disturbances, thunderstorms, electrical appliances with no interference elimination,

television sets and computers located near the DCF receiver.

If the weather station cannot detect the DCF signal, time and date must be set manually.

Note: If the weather station detects DCF signal but the current time on the display is incorrect (e.g. shifted

±1 hour), you must always set the correct time zone for the country where you are using the station, see

Manual Setting.

After receiving DCF signal and setting time zone, short press the

button.

The current time will be shown with the appropriate time zone dierence (ZONE will be shown on the left

of the time value).

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu EMOS E8825 Meteostanice papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat EMOS. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému EMOS E8825 Meteostanice v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro EMOS Meteostanice
Další manuály Meteostanice

Často kladené otázky o EMOS E8825 Meteostanice

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

EMOS E0300 Meteostanice

Manuál

EMOS E0305 Meteostanice

Manuál

EMOS E0211 Meteostanice

Manuál

EMOS E8236 Meteostanice

Manuál

EMOS E6016 Meteostanice

Manuál

EMOS E5018 Meteostanice

Manuál

EMOS E5201 Meteostanice

Manuál

EMOS E5005 Meteostanice

Související kategorie