Manuál Vonroc CS505AC Rozbrušovačka

Manuál

EN

7

WWW.VONROC.COM

b) Use personal protective equipment. Always

wear eye protection. Protective equipment

such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

c)

Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking up

or carrying the tool. Carrying power tools with

your finger on the switch or energising power

tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewel-

lery or long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust related hazards.

h)

Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and

must be repaired.

c)

Disconnect the plug from the power source and/

or the battery pack from the power tool before

making any adjustments, changing accessories,

or storing power tools. Such preventive safety

measures reduce the risk of starting the power

tool accidentally.

d) Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in

the hands of untrained users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f)

Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions, tak-

ing into account the working conditions and the

work to be performed. Use of the power tool for

operations different from those intended could

result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles

and grasping surfaces do not allow for safe

handling and control of the tool in unexpected

situations.

5) Service

a) Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

SAFETY INSTRUCTIONS FOR CHOP SAWS 

CUTTING INSTRUCTIONS

1. Only ever use the cutting edge (never the side)

of the disc for cutting. Avoid putting sideways

pressure on the disc, and in particular, making

it jam.

2. Keep hands and body away from the disc.

Whilst cutting with the machine, do not wear

loose clothes which could get caught in it.

3. Treat the disc cutting saw with care, never drop

it, always store it in a safe, dry place. Avoid

excessive temperatures and humidity.

4. Ensure that all disc flanges and other fitted

parts are in good condition and assembled

according to instructions. Damaged or missing

parts can lead to disc damage. Always use the

flanges delivered with the machine.

5. Never work with damaged discs, as these can

be dangerous. When changing the disc, first

switch off the machine. Rotate the disc by

hand and inspect it for unevenness, twists or

shearing. If you find any of these, get the disc

removed and replace it with a new one. Also

replace the disc if it falls to the floor. It may

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu Vonroc CS505AC Rozbrušovačka papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Vonroc. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Vonroc CS505AC Rozbrušovačka v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro Vonroc Rozbrušovačky
Další manuály Rozbrušovačky

Často kladené otázky o Vonroc CS505AC Rozbrušovačka

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

Einhell TC-MC 355 Rozbrušovačka

Manuál

Parkside IAN 373210 Rozbrušovačka

Manuál

Einhell TC-MC 355/1 Rozbrušovačka

Manuál

Asist AE5PD200N Rozbrušovačka

Manuál

Parkside IAN 292200 Rozbrušovačka

Manuál

Bosch GCO 20-14 Rozbrušovačka

Manuál

Redstone MT100 Rozbrušovačka

Související kategorie