Manuál Vonroc AG505AC Úhlová bruska

Manuál

EN

5

WWW.VONROC.COM

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating apower tool.

Do not use apower tool while you are tired or

under the influence of drugs, alcohol or medi-

cation. Amoment of inattention while operating

power tools may result in serious personal

injury.

b) Use personal protective equipment. Always

wear eye protection. Protective equipment

such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your finger on the switch or energising

power tools that have the switch on invites acci-

dents.

d) Remove any adjusting key or wrench before

turning the power tool on. Awrench or akey

left attached to arotating part of the power tool

may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewel-

lery or long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust related hazards.

h) Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles. Acareless action

can cause severe injury within afraction of

asecond.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and

must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool be-

fore making any adjustments, changing acces-

sories, or storing power tools. Such preventive

safety measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in

the hands of untrained users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’soperation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions, tak-

ing into account the working conditions and the

work to be performed. Use of the power tool for

operations different from those intended could

result in ahazardous situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles

and grasping surfaces do not allow for safe

handling and control of the tool in unexpected

situations.

5) Service

a) Have your power tool serviced by aqualified

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

SAFETY WARNINGS COMMON FOR GRINDING

OR ABRASIVE CUTTINGOFF OPERATIONS

a) This power tool is intended to function as

agrinder tool. Read all safety warnings, in-

structions, illustrations and specifications pro-

vided with this power tool. Failure to follow all

instructions listed below may result in electric

shock, fire and/or serious injury.

b) Operations such as sanding, wire brushing, pol-

ishing are not recommended to be performed

with this power tool. Operations for which the

power tool was not designed may create ahaz-

ard and cause personal injury.

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu Vonroc AG505AC Úhlová bruska papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Vonroc. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Vonroc AG505AC Úhlová bruska v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro Vonroc Úhlové brusky
Další manuály Úhlové brusky

Často kladené otázky o Vonroc AG505AC Úhlová bruska

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

Vonroc AG506AC Úhlová bruska

Manuál

Skil 3922 CA Úhlová bruska

Manuál

Metabo WA 13-125 Quick Úhlová bruska

Manuál

Parkside IAN 402248 Úhlová bruska

Manuál

Tuson 130047 Úhlová bruska

Manuál

Asist AE3U235G Úhlová bruska

Manuál

Asist H311-050A1 Úhlová bruska

Manuál

Skil 3922 DA Úhlová bruska

Související kategorie