Manuál Skil 3821 CA Rotační kladivo

Manuál

12

being switched on, when

- the load is too high --> remove load and restart

- the battery temperature is not within the allowable

operating temperature range of -20 to +50

o

C -->2

levels of the battery level indicator start ashing when

pressing button G7c; wait until battery has returned

within the allowable operating temperature range

- the battery is nearly empty (to protect against

deep discharge) --> a low battery level or ashing low

battery level 7b is shown by the battery level indicator

when pressing button G; charge battery

! do not continue to press the on/off switch after the

tool is switched off automatically; battery may be

damaged

• Changing direction of rotation 8

- when not properly set in left/right position, switch B2

cannot be activated

! change direction of rotation only when tool is at a

complete standstill

• Installing and removing bits 9

! clean and lightly lubricate the SDS+ accessory

before insertion

- insert accessory in SDS+ chuck while turning and

pushing it until it engages; the accessory locks in

position automatically

- pull accessory to check that it is locked correctly

- remove accessory by pulling back locking sleeve D

! the SDS+ accessory requires freedom of

movement which causes eccentricity when tool

is off-load; however, the accessory automatically

centres itself during operation without affecting

drilling precision

! do not use bits with a damaged shank

• Combined switch for on/off q and speed control w

- control the speed steplessly from zero to maximum by

putting less or more pressure on the switch B

• Selecting operating mode e

- turn switch C to the desired operating mode until it

snap-locks

1 = normal drilling/screwdriving

2 = impact drilling

! select operating mode only when tool is switched

off and battery is removed

- the hammer mechanism is activated by applying

a slight pressure on the tool when the drill bit is in

contact with the workpiece

- it takes a short time for the hammer mechanism to

reach full impact power

- best hammer drilling results can be obtained by only a

slight pressure on the tool; drilling performance will not

improve by applying more pressure on the tool

• LED-light r

- LED-light E automatically lights on when activating the

switch B

! when LED worklight starts ashing, the battery

protection is activated (see above)

• Holding and guiding the tool t

! while working, always hold the tool at the grey-

coloured grip area(s)

- always use auxiliary handle J (can be adjusted as

illustrated) y

- keep ventilation slots F2 uncovered

- do not apply too much pressure on the tool; let the tool

• Use suitable detectors to nd hidden utility lines

or call the local utility company for assistance

(contact with electric lines can lead to re or electrical

shock; damaging a gas line can result in an explosion;

penetrating a water pipe will cause property damage or

an electrical shock)

• Ensure that direction-of-rotation selector A 2 is in the

middle (locking) position before making any adjustments

or changing accessories as well as when carrying or

storing the tool.

• Be aware of the forces that occur as a result of jamming

(especially when drilling metals); always use auxiliary

handle J and take a secure stance

ACCESSORIES

• SKIL can assure awless functioning of the tool only

when original accessories are used

• Use only accessories with an allowable speed matching

at least the highest no-load speed of the tool

AFTER USE

• When you put away the tool, switch off the motor and

ensure that all moving parts have come to a complete

standstill

BATTERIES

• The battery supplied is partially charged (to ensure

full capacity of the battery, completely charge the battery

in the battery charger before using your power tool for

the rst time).

• Only use the following batteries and chargers with

this tool

- SKIL battery: BR1*31****

- SKIL charger: CR1*31****

• Do not use the battery when damaged; it should be

replaced immediately

• Do not disassemble the battery

• Do not expose tool/battery to rain

• Permitted ambient temperature (tool/charger/battery):

- when charging 4...40

o

C

- during operation -20…+50

o

C

- during storage -20…+50

o

C

EXPLANATION OF SYMBOLS ON TOOL/BATTERY

3

Read the instruction manual before use

4

Batteries may explode when disposed of in re, so do not

burn battery for any reason

5

Store tool/charger/battery in locations where temperature

will not exceed 50

o

C

6

Do not dispose of electric tools and batteries together

with household waste material

USE

• Charging battery

! read the safety warnings and instructions provided

with the charger

• Removing/installing the battery 2

• Battery level indicator 7

- press the battery level indicator button G to show the

current battery level 7a

! when the lowest level of the battery indicator

starts ashing after pressing button G7b, the

battery is empty

! when 2 levels of the battery indicator start ashing

after pressing button G7c, the battery is not

within the allowable operating temperature range

• Battery protection

The tool is suddenly being switched o or prevented from

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu Skil 3821 CA Rotační kladivo papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Skil. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Skil 3821 CA Rotační kladivo v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro Skil Rotační kladiva
Další manuály Rotační kladiva

Často kladené otázky o Skil 3821 CA Rotační kladivo

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

Skil 1766 AK Rotační kladivo

Manuál

Skil 1781 GC Rotační kladivo

Manuál

Skil 1734 AA Rotační kladivo

Manuál

Skil 1763 AA Rotační kladivo

Manuál

Skil 1781 GB Rotační kladivo

Manuál

Skil 1764 AK Rotační kladivo

Manuál

Skil 3810 AA Rotační kladivo

Manuál

Skil 1770 GA Rotační kladivo

Související kategorie