Manuál Sanibroyeur SANICOMPACT Star Toaleta

Manuál

8

MOUNTING THE PAN AND

CUTTING OUT THE FASCIA

PANEL

1 - Offer up the fascia panel (not provided) to

the support frame which has been fixed

to the wall.

2 - Locate the panel exactly to the support

frame.

3

- Drill 2 holes (25mm) through the fascia

panel to correspond with the threaded

rods on which the pan will hang.

4

- Offer up the template

E

to the support

wall fascia, positioning the holes for the

WC support rods accordingly.

5 - Trace the inner shape of the template

onto the fascia.

6

- Remove the template

E

and cut out the

fascia as traced.

7

- Make any finishes to the support wall and

fix on the fascia panel.

8 - Note: If you are tiling the wall, the tiles will

have to be cut out in the same way as the

fascia panel.

9

CONNECTIONS

WARNING: Before making the various

connections, check the following:

1

- Ensure that the threaded rods are

correctly spaced and the dimensions in

drawing 7a adhered to, otherwise the

screw covers will not fit.

2

- Put the template

E

in place onto the

threaded rods.

9a

CONNECTION OF WASH HAND BASIN

1 - Saw off the tip of the inlet spigot.

De-burr it.

2 - Connect the rubber waste connection

I

to the spigot with the correct clip

J

and crimp it with pincher pliers.

3 - Connect the other end of the connec-

tor

I

to the 40 mm end of washbasin

waste pipe and secure it with clip

K

.

9b

DISCHARGE CONNECTION

1 - Slide tube

F

onto the discharge

connector.

2 - Fix the non-return valve

G

with clip

H

to

the discharge pipe.

3 - WARNING: The non-return valve must

be installed vertically with the arrow

pointing upwards.

4 - Stretch the connector and fix the end to

the non-return valve using clip

H

.

9C CONNECTION OF THE WATER SUPPLY

Connect the water supply pipe to the water

inlet pipe (male to female iron connection).

15

CARE OF YOUR

SANICOMPACT

®

STAR/

SANICERAMIC 3

®

• Normal household bleaches/WC cleansers

can be used with a SANICOMPACT

®

Star/

SANICERAMIC 3

®

• To avoid the build up of limescale in the

unit, use the following procedure.

- disconnect the power supply to the unit,

- pour 3 or 4 litres of water mixed with a

strong solution of descalent/spirit of salts

into the WC pan,

- leave it to stand for 1 or 2 hours, then

re-connect the electric supply,

- flush several times to clear.

The frequency of this operation will depend

on the hardness of the water in your locality.

We would recommend this be done about

twice a year.

13

COMPLETING

THE INSTALLATION

1 - Remount the pan onto the threaded

rods.

2 - Fit the white UPVC washers

L

onto the

threaded rods and tighten the nuts

B

.

Then fit the nut covers

M

.

3 - Cut away any protruding lip of the

template around the pan contour.

4 - Seal the pan/wall joint with silicon.

17

GUARANTEE

The SANICOMPACT

®

Star/SANICERAMIC

3

®

range is guaranteed for 2 years, subject to

correct installation and usage.

11

NORM

10

MOUNTING THE PAN

Once the connections have been made,

1 - Fit the clear tubes

D

onto the threaded

rods.

2 - Set the pan onto the threaded rods wit-

hout tightening the nuts.

12

START-UP AND PROGRAMMING

12a

START-UP

1 - Plug it in the power socket. Wait 20

seconds: appliance initializing. Open the

water tap to rinse well. Start the normal

flush by pressing the dark grey side.

Put a few sheets of toilet paper down in

the bowl and flush again.

2 - Turn on the washbasin tap. The unit

should activate automatically.

3 - Demount the pan and check the water

tightness of all connections.

4 - WARNING: Any dripping of the taps will

cause the unit to activate automatically.

12b

PROGRAMMING

The length of your SANICOMPACT

®

Star/

SANICERAMIC 3

®

’s flush varies according to

which cycle you choose.

Eco flush (by default, light grey button):

19 seconds and 3.8L: rinsing of the bowl for

10 seconds, the pump works for 7 seconds

(for 7 seconds, the bowl continues to fill), then

the bowl fills again for 2 seconds.

You can lengthen the first rinse of the eco

flush to 16 seconds if the default flush is not

enough.

Normal flush (dark grey button):

25 seconds and 5L: The bowl is rinsed for

16 seconds, the pump works for 7 seconds

(for 7 seconds, the bowl continues to fill) then

the bowl fills again for 2 seconds.

To re-programme:

• Hold the ECO button (light grey button)

down for 5 seconds.

• The motor works for 2 seconds, this means

you have entered programming mode.

• Each time you press the dark grey button

you increase the length of the ECO flush

by 1 second: each time you press it will be

validated by the motor running for a short

period.

• Each time you press the grey button you

decrease the length of the flush by 1 second:

each time you press it will be validated by

the motor running for a short period.

To exit programming mode:

• Wait for 5 seconds without pressing any

buttons.

The motor runs for 2 seconds, this means

that you have left programming mode.

Comment 1: the minimum length of the first

rinsing flush for the normal flush is 19 seconds

(default programming)

and the maximum length is 25 seconds.

Comment 2: the normal flush cannot be

modified.

14

USAGE

1 - A WC fitted with a SANICOMPACT

®

Star/

SANICERAMIC 3

®

pump/macerator does

not require any special maintenance.

2 - WARNING: The SANICOMPACT

®

Star/

SANICERAMIC 3

®

range should only

be used for the evacuating of

normal human waste, toilet paper and

household WC cleansers.

Damage may occur to the machine if

the following are disposed of via the

WC; Cotton wool, tampons, sanitary

towels, wet wipes, kitchen towels,

condoms as well as other fabric or

hard objects. Solvents, acids and

other chemicals can also cause

damage to the unit, and will

invalidate the warranty.

3 -

WARNING: In the event that the unit is

not to be used for a prolonged time the

water supply to the bathroom is turned

off.

4 - This device is not designed for

persons (including children) with

limited physical, sensory or mental

abilities, or those with minimal

experience and knowledge, unless

they are monitored and are given

the necessary instructions for using

the device, with the help of a person

responsible for their safety. Monitor

children and make sure they do not

play with the device.

16

AFTER SALES SERVICE

In the unlikely event of a failure or

malfunction, please call our after sales

service department. You will be directed to

your nearest registered service engineer.

WARNING: Always disconnect the electricity

supply before attempting any work on the

SANICOMPACT

®

Star/SANICERAMIC 3

®

.

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu Sanibroyeur SANICOMPACT Star Toaleta papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Sanibroyeur. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Sanibroyeur SANICOMPACT Star Toaleta v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro Sanibroyeur Toalety
Další manuály Toalety

Často kladené otázky o Sanibroyeur SANICOMPACT Star Toaleta

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

Sanibroyeur SANICOMPACT 48 ECO+ Toaleta

Manuál

Sanibroyeur SANICOMPACT Elite Toaleta

Manuál

Sanibroyeur SANICOMPACT Comfort ECO+ Toaleta

Manuál

Sanibroyeur SANICOMPACT Luxe ECO+ Toaleta

Manuál

Sanibroyeur SANICOMPACT 43 ECO+ Toaleta

Manuál

Separett Villa 9000 Toaleta

Manuál

Allibert Uno Toaleta

Manuál

Dometic MF7100 Toaleta

Související kategorie