Manuál Ryobi OHT1850H Křovinořez

Manuál

4 | English

■ Cover the blade with the blade protector before storing

the product, or during transportation.

■ For transportation in a vehicle, secure the product

against movement or falling to prevent injury to persons

or damage to the product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national

provisions and regulations.

Follow all special requirements on packaging and labelling

when transporting batteries by a third party. Ensure that

no batteries can come in contact with other batteries

or conductive materials while in transport by protecting

exposed connectors with insulating, non-conductive caps

or tape. Do not transport batteries that are cracked or

leaking. Check with the forwarding company for further

advice.

MAINTENANCE

WARNING

Use only original manufacturer’s replacement parts,

accessories, and attachments. Failure to do so can

cause possible injury, contribute to poor performance,

and may void your warranty.

WARNING

Servicing requires extreme care and knowledge

and should be performed only by a qualifi ed service

technician. For service, bring the product to an

authorised service centre. When servicing, use only

identical replacement parts.

WARNING

The blades are extremely sharp. To prevent personal

injury, exercise extreme caution when cleaning,

lubricating, and fi tting or removing the blade protector.

■ Ensure the battery is disconnected and the

supply cord is disconnected from the supply

before performing any maintenance, cleaning, or

adjustments.

■ You may only make adjustments and repairs

described in this manual. For other repairs, contact

an authorised service agent.

■ After each use, clean the body and handles of the

product with a soft, dry cloth.

■ After each use, clean the debris from the blades

with a stiff brush, and then carefully apply a rust

preventative lubricant before refitting the blade

protector. The manufacturer recommends you to use

a rust-preventative lubricant spray to apply an even

distribution and reduce the risk of personal injury

from contact with the blades. For information about

suitable spray product, check with an authorised

service centre.

■ Lubricate the blades lightly before use if necessary

using the above method.

■ Check all nuts, bolts, and screws at frequent intervals

for proper tightness to ensure the product is in safe

working condition. Any part that is damaged should

be properly repaired or replaced by an authorised

service centre.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still

impossible to completely eliminate certain residual risk

factors. The following hazards may arise in use and the

operator should pay special attention to avoid the following:

■ injury caused by the blade

– The blade cannot be guarded while cutting. Keep

the blade away from yourself and others. Cover it

with the blade protector when the product is not in

use.

■ injury caused by vibration

– Always use the right tool for the job, use designated

handles, and restrict working time and exposure.

■ hearing injury caused by exposure to noise

– Wear ear protection and limit exposure.

RISK REDUCTION

It has been reported that vibrations from handheld tools

may contribute to a condition called Raynaud’s Syndrome.

Symptoms may include tingling, numbness, and blanching

of the fi ngers, usually apparent upon exposure to cold.

Hereditary factors, exposure to cold and dampness, diet,

smoking, and work practices are all thought to contribute to

the development of these symptoms. There are measures

that can be taken by the operator to possibly reduce the

effects of vibration:

■ Keep your body warm in cold weather. When

operating the unit, wear gloves to keep the hands

and wrists warm. It is reported that cold weather is

a major factor contributing to Raynaud’s Syndrome.

■ After each period of operation, exercise to increase

blood circulation.

■ Take frequent work breaks. Limit the amount of

exposure per day.

If you experience any of the symptoms of this condition,

immediately discontinue use and see your physician.

WARNING

Injuries may be caused, or aggravated, by prolonged

use of a tool. When using any tool for prolonged periods,

ensure you take regular breaks.

KNOW YOUR PRODUCT

See page 144.

1. Trigger

2. Cord hook

3. Rear handle

4. Front handle

5. Operator presence switch

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu Ryobi OHT1850H Křovinořez papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Ryobi. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Ryobi OHT1850H Křovinořez v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro Ryobi Křovinořezy
Další manuály Křovinořezy

Často kladené otázky o Ryobi OHT1850H Křovinořez

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

Ryobi RBC52FSBOS Křovinořez

Manuál

Ryobi RHT1850H25HS Křovinořez

Manuál

Ryobi OGS1822 Křovinořez

Manuál

Ryobi RBC30SESB Křovinořez

Manuál

Ryobi RHT1850XLiS Křovinořez

Manuál

Ryobi RY18HT50A Křovinořez

Manuál

Ryobi RHT6060RS Křovinořez

Manuál

Ryobi OHT1850 Křovinořez

Související kategorie