Manuál Rexel Auto+ 750X Skartovačka

Manuál

7

G

CD/DVD Shredding

A separate CD/DVD tray is provided to collect the shredded

CD/DVD shards. Ensure that this is correctly mounted onto the

standard shredder bag frame before shredding (see g 7).

1 Lift up the paper loading door (see g 5).

2 Always insert CDs/DVDs in the CD/DVD slot (see g 6).

Only shred one CD/DVD at a time.

3 Close the paper loading door (see g 2).

4 Empty the CD/DVD bin after 8 CDs/DVDs to avoid waste

spilling over into the paper waste bin.

5 Remove the CD/DVD tray before recommencing to shred

paper and store on the side of the shredder (see g 7).

Reverse Function

1 Should you wish to reverse paper out whilst shredding, a

reverse button (

) has been tted for your convenience.

2 Reverse the paper out then turn the machine off using the

ON/OFF switch at the rear of the shredder. Remove the

paper from the manual feed slot (if being used) or open the

loading door, remove the remaining stack of paper, then pull

the jammed paper free of the cutting mechanism.

3 To resume shredding, turn the shredder on using the ON/

OFF switch at the rear of the shredder. Return the switch to

the auto position (

).

Operation

1 After unpacking the product pull out the shredder bag frame

and remove the CD shard tray, which sits on top of the bag

frame. Store this tray on the product as shown and use

when you shred CDs/DVDs (see g 1).

2 Lift up the loading door (E) and open oil ap (V).

3 Remove oil cap and ll up the reservoir using the 60ml

bottle of oil provided. Replace the cap.

4 Connect the shredder to mains supply.

5 Check that the on/off switch at the back of the machine is

switched to the ‘ON’ position.

6 Press and hold down the Auto button (

) for 5 seconds

to start the pump and prime the system. Only required

when the product is used for the rst time.

7 To load the shredder, simply lift the loading door handle (see

g 5) to open the loading door and insert documents. You

can open the door further to 90 degrees for easier access

if required. Load up to 750 sheets at a time into the feed

chamber (see g 2).

Do not ll above the MAX level, this could damage the

shredder (see g 3).

8 The shredder will start the shredding cycle automatically

ONLY after closing the loading door (see g 2).

If there is paper in the Autofeed chamber after rst attempt,

open and re-close the paper loading door a second time.

Attention: If required you can now lock the loading door by

entering a 4 digit code (see Locking the Paper Loading Door

section).

9 If you only have up to 12 sheets to shred, you can use the

manual feed slot, provided the auto feed chamber is empty

(see g 4).

J Insert paper to be shredded into the feed area. The

shredder will detect the paper and start automatically.

K If the shredder is left in auto mode for more than 2 minutes

without being used, the shredder will automatically turn back to

standby mode in order to save power.

L The shredder will automatically ‘wake up’ from sleep mode

when paper is inserted into the shred mouth or you open

the loading door. There is no need to press the Auto button

(

).

Locking the Paper Loading Door

For additional security the paper loading door can be locked

during the shredding of condential material.

To lock shredder:

1

Place documents in tray. Close paper loading door (see g 2).

2

Press any 4 digits. REMEMBER YOUR CODE!

Shredder unlocks automatically when:

• 4 digit code is re-entered.

• Shredding is complete.

• Shredder is inactive for 30 minutes (but documents remain

in tray)

Automatic Jam Clearance

In the unlikely event of the shredder jamming, the Auto+ 750X

will automatically reverse and forward the engine three times to

clear a jam. During this operation the Paper Jam indicator will

ash (

).

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu Rexel Auto+ 750X Skartovačka papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Rexel. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Rexel Auto+ 750X Skartovačka v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro Rexel Skartovačky
Další manuály Skartovačky

Často kladené otázky o Rexel Auto+ 750X Skartovačka

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

Rexel EasyFeed SC170 Skartovačka

Manuál

Rexel Mercury RES1223 Skartovačka

Manuál

Rexel Auto+ 175X Skartovačka

Manuál

Rexel Optimum AutoFeed+ 600M Skartovačka

Manuál

Rexel Promax RPS812 Skartovačka

Manuál

Rexel Optimum AutoFeed+ 100X Skartovačka

Manuál

Rexel Mercury RSX1530 Skartovačka

Manuál

Rexel Promax RSS1535 Skartovačka

Související kategorie