Manuál Philips GC4934 Azur Advanced Žehlička

Manuál

ENGLISH

9

5 Gently shake the appliance to allow scale particles to fall out (Fig. 2-8).

6 Insert the Quick Calc Release collector back into the appliance (Fig. 2-10).

7 Push down the lever (“click”) to lock the collector (Fig. 2-11).

Calc-Clean (specic types only)

IMPORTANT: After 1 to 3 months of use, the Calc-Clean reminder light starts ashing to

remind you to use the Calc-Clean function (Fig. 3-1). This is to remove scales in your iron

to prolong its life.

Tip: The Calc-Clean function can be used at any time, even when the reminder light is

not activated yet. If you live in a hard water area, use the function more frequently.

1 Make sure that the steam slider is set to “steam o” position (Fig. 3-2).

2 Make sure there is enough water (more than 3/4) in the water tank. If there is not

enough water, unplug the iron, ll the water to MAX indication (Fig.3-3) and plug in

the iron again (Fig.3-4).

Do not pour vinegar or other descaling agents into the water tank.

3 Wait for the iron to heat up. This takes about 2 minutes (Fig.3-5).

Note: the Calc-Clean reminder light turns o during heating up. .

4 Unplug the iron when the ‘iron ready’ light stops breathing (Fig. 3-7).

5 Hold the iron over the sink. Keep pushing the Calc-Clean button and gently shake

the iron forth and back until all water in the water tank has been used up (Fig. 3-8).

Scales is ushed out, steam and boiling water also come out of the soleplate.

Note: Repeat steps 2 to 5 if the water that comes out of the appliance still contains

scale particles.

6 Plug in the appliance and let the appliance heat up to dry the soleplate. This takes

about 2 minutes (Fig. 3-9).

7 Unplug the appliance (Fig. 3-10). Move the appliance gently over a piece of cloth to

remove any water stains on the soleplate (Fig. 3-11).

Troubleshooting

This chapter summarises the most common problems you could encounter with

the appliance. If you are unable to solve the problem with the information below,

visit www.philips.com/support for a list of frequently asked questions or contact

the Consumer Care Centre in your country.

Problem Possible cause Solution

The iron cannot

remove wrinkles from

the garment.

There is no steam during

ironing.

Fill the water tank and set the steam

slider to .

The iron does not

produce any steam.

There is not enough water in

the tank.

Fill the water tank.

The steam slider is set to . Set the steam slider to .

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu Philips GC4934 Azur Advanced Žehlička papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Philips. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Philips GC4934 Azur Advanced Žehlička v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro Philips Žehličky
Další manuály Žehličky

Často kladené otázky o Philips GC4934 Azur Advanced Žehlička

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

Philips GC9241 Žehlička

Manuál

Philips GC8210 Žehlička

Manuál

Philips GC7929 PerfectCare Compact Plus Žehlička

Manuál

Philips GC4412 Žehlička

Manuál

Philips GC5010 PerfectCare Xpress Žehlička

Manuál

Philips GC3584 Žehlička

Manuál

Philips DST7051 Žehlička

Manuál

Philips HI5922 Žehlička

Související kategorie