Manuál Panasonic RP-BTD10 Sluchátka

Manuál

VQT5J79

5

5

ENGLISH

With Bluetooth

®

enabled phones (cell phones or smartphones) that support the

“HSP” or “HFP” Bluetooth

®

profile, you can use the unit for phone calls.

• HSP (Headset Profile):

This profile can be used to receive monaural sounds and establish two-way

communication using the microphone on the unit.

• HFP (Hands-Free Profile):

In addition to the HSP functions, this profile has the incoming and outgoing calls

function.

1

Connect the Bluetooth

®

enabled phone and unit (→ P. 3)

2

When answering an incoming call

Press Call on the unit

and answer the call

• During an incoming call,

ringtone will sound from the

speaker and the LED will blink.

•(HFP only) To reject the

incoming call, press and hold

Call

until the ringtone stops.

Left

Call

Microphone

When making an outgoing call

Make an outgoing call on

the Bluetooth

®

enabled

phone

• Also refer to the operating

manual for the Bluetooth

®

enabled phone.

(Checking and operation steps on the

unit are explained below)

• During an outgoing call, ringtone

will sound from the speaker and

the LED will blink.

• To cancel the outgoing call,

press Call

.

A beep will sound.

•(HFP only) When the phone is

idle, press and hold Call

for

approximately 2 seconds. An

outgoing call will be made to the

last dialed number. One short

click will sound from the speaker

and the LED will blink.

3

Start talking

• The LED will repeatedly blink 2 times during a call.

• The volume can be adjusted during a phone call. For setting instructions, see

page 4.

4

Press Call to end the phone call

• A beep will sound.

Making a phone call

■

Note

• There may be instances when hands free setting needs to be done on the

Bluetooth

®

enabled phone.

• Depending on the Bluetooth

®

enabled phone, you may hear incoming and

outgoing call ringtones of the phone from the unit.

•(HFP only) Press and hold the Call

on the unit for approximately 2 seconds.

The calling device will be switched between the Bluetooth

®

enabled phone and

the unit.

Useful functions

Resetting the unit

This unit can be reset when all operations are rejected. Connect the unit to a

computer using the USB charging cord. Then press the RESET hole with a thin,

pointed object. Check that the LED (red) goes out. Keep pressing the RESET hole

(→ P. 2) for approximately 5 seconds to reset the unit. All the previous operations

will be cancelled. (The pairing device information will not be deleted.)

Auto power off

If the unit is silent for approximately 5 minutes and operations for Bluetooth

®

devices are idle during that period, a beep will sound and the power will be

automatically turned off.

LED indicator light

When the battery level is low during use of the unit, the blue blinking LED on the

left speaker will change to red. A beep will sound every 1 minute. When the battery

runs out, the power will turn off.

Restoring to the factory settings

When you want to delete all pairing device information, etc., you can restore the

unit to the factory settings (original settings upon purchase).

1 Turn off the unit

2 Press and hold the power

button and Previous for 5 seconds or

more simultaneously

• The LED on the left speaker will light in red for approximately 2 seconds. The

unit will restore to the factory settings.

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu Panasonic RP-BTD10 Sluchátka papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Panasonic. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Panasonic RP-BTD10 Sluchátka v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro Panasonic Sluchátka
Další manuály Sluchátka

Často kladené otázky o Panasonic RP-BTD10 Sluchátka

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

Panasonic RP-HTX90N Sluchátka

Manuál

Panasonic RP-BTS30 Sluchátka

Manuál

Panasonic RP-BTS30E Sluchátka

Manuál

Panasonic RP-BTS10E Sluchátka

Manuál

Panasonic RP-WF830EB Sluchátka

Manuál

Panasonic RP-HC56E Sluchátka

Manuál

Panasonic RP-HF400B Sluchátka

Manuál

Panasonic RP-BTS10 Sluchátka

Související kategorie