Manuál Lanaform LA120123 Breva Zvlhčovač
Potřebujete manuál pro svůj Lanaform LA120123 Breva Zvlhčovač? Níže si můžete zdarma prohlédnout a stáhnout PDF manuál v češtině. Tento produkt má aktuálně 2 často kladené otázky, 0 komentářů a má 0 hlasů. Pokud toto není manuál, který chcete, kontaktujte nás.
Je váš výrobek vadný a manuál nenabízí žádné řešení? Přejděte do Repair Café a získejte opravu zdarma.
Manuál
Loading…
English 4 / 40
midier stops and the indicator lights up red.
You can also stop it at any time by pressing
a fourth time on the touch control button.
Important notes
Use only clean distilled or demineralised
water in order to avoid any malfunction.
Do not pour water into the diuser sprin-
kler tip in order to avoid any malfunction
and risk of re.
Make sure the reservoir cap is tightly closed
after lling in order to avoid any leakage or
electric shocks.
The reservoir must be kept clean. If there
is any dirt on the vapour emission dius-
er sprinkler tip, clean it with a brush or a
damp cloth.
Even though there is a
safety device that stops the
transducer from working, do
not leave the device connected
when you are not using it.
MAINTENANCE
AND STORAGE
Always switch o the humidier before per-
forming any maintenance or storage activities.
If the water contains too much calcium and
magnesium, it may deposit a “white pow-
der” in the device. If this foam is deposited
on the transducer
[
,
]
, this will prevent
the Breva humidier from working properly.
Maintenance
We recommend:
1 Using clean distilled or demineralised
water each time the device is used.
2 Cleaning the reservoir every
2 days and cleaning the
transducer every week.
3 Cleaning the device (see expla-
nations below) and making sure
that all of its parts are completely
dry when it is not in use.
To clean the transducer [
,
]:
1 Place 2 to 5 drops of vinegar on its
surface and leave for 2 to 5 minutes.
2 Brush the foam o the surface
using a soft brush. Do not use a
hard tool to scrape the surface.
3 Rinse the reservoir of the
base in clean water.
Do not use soap, solvent or spray cleaner
to clean the transducer.
To clean the basin [
,
]:
1 Clean the basin with water using
a soft cloth, and use vinegar if
there are any foam or limes-
cale deposits on the inside.
2 Rinse the basin in clean water.
To clean the diuser nozzle of the device
[
,
]
:
1 Clean it with a brush or damp cloth.
2 Rinse the vapour emission
sprinkler tip in clean water.
To clean the anti-scaling lter [
,
]:
1 The ceramic beads must be
cleaned after using approxi-
mately 1000ltr of water.
2 Remove the reservoir’s lter.
3 Put some white vinegar into
a glass and soak the lter for
approximately 10 minutes.
4 Remove the glass lter and
shake it several times.
5 Rinse the lter in clean water.
Storage
If you do not intend using the device for
a lengthy period, remove the reservoir’s
lter and allow it to dry completely, then
wrap in a protective package and store it
with the clean, dry humidier in a cool, dry
place out of direct light.
TROUBLESHOOTING
In the event of a malfunction under nor-
mal conditions of use, please refer to the
following list:
No operating indicator
light, no vapour
No voltage, no current.
Check that the device is connected
and that there is no mains fault.
Red indicator light, no vapour.
No water in the reservoir.
Pour clean distilled or demineralised
water into the reservoir.
The vapour has an
unpleasant odour.
The device is new.
Drain the water from the reservoir
and leave the reservoir to air
out for at least hours.
The water is contaminated or has
been in the reservoir too long.
Unplug the device, drain the water
from the reservoir, rinse and clean
the reservoir, and ll the reservoir
with demineralised or distilled water.
Low vapour intensity.
The vapour emission sprinkler
tip is obstructed.
Unplug the device and clean the
vapour emission sprinkler tip.
The water is dirty or has been
standing in the reservoir for too long.
Clean the reservoir and ll it
with clean, fresh water.
Unusual noise emitted
during operation.
The device is on an unstable
or non-at surface.
Unplug the device and place
it on a at, stable surface.
Vapour leaves the device around
the diuser sprinkler tip.
There are gaps between the
sprinkler tip and reservoir.
Clean the diuser sprinkler tip
and replace it on the reservoir.
The following eects are not
regarded as malfunctions:
1 If your water is particularly hard
(contains a lot of minerals), the
humidier may produce a sort of
white dust. This is not a malfunc-
tion. The solution is to clean the
anti-limescale lter more frequently
or to use water that is not as hard.
2 If you stand close to the humidi-
er, you will hear the gurgling of
the water and this is normal.
3 The device runs very calmly but not
entirely quietly. A sound level of less
than 35dB is regarded as normal.
ADVICE ON WASTE
DISPOSAL
The packaging consists entirely of envi-
ronmentally-friendly materials that can be
taken to your local waste sorting centre to
be used as secondary materials. Cardboard
can be placed in a paper collection contain-
er. Packing lm must be taken to your local
sorting and recycling centre.
When you are no longer using the device,
dispose of it in an environmentally respon-
sible manner and in compliance with the
statutory requirements.
LIMITED WARRANTY
LANAFORM guarantees that this product
will be free from any material and work-
manship defects for a period of two years
from the date it was purchased, other than
as specied below.
The LANAFORM warranty does not cover
damage caused by normal wear and tear
on this product. In addition, the warranty
on this LANAFORM product does not cover
damage caused as a result of any abusive,
inappropriate or incorrect use, accident,
attachment of any unauthorised accesso-
ry, modication of the product or any oth-
er situation of whatever kind, beyond the
control of LANAFORM.
LANAFORM shall not be held liable for
any type of incidental, consequential or
special damage.
EN FR NL DE ES IT PL CS SK HU SL HR RU BG SV AR
E-IM-Breva-001-2018.indd 4 5/09/2018 09:16:40
Loading…
Hodnocení
Ohodnoťte Lanaform LA120123 Breva Zvlhčovač a dejte nám vědět, co si o výrobku myslíte. Chcete se podělit o své zkušenosti s tímto výrobkem nebo se na něco zeptat? Nechte nám ve spodní části stránky komentář.Více o tomto návodu
Chápeme, že je hezké mít k vašemu Lanaform LA120123 Breva Zvlhčovač papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Lanaform. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Lanaform LA120123 Breva Zvlhčovač v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.
Specifikace
| Značka | Lanaform |
| Modelka | LA120123 Breva |
| Kategorie | Zvlhčovače |
| Typ souboru | |
| Velikost souboru | 1.8 MB |
Všechny návody pro Lanaform Zvlhčovače
Další manuály Zvlhčovače
Často kladené otázky o Lanaform LA120123 Breva Zvlhčovač
Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.
Při jaké vlhkosti je dobré používat zvlhčovač? Ověřeno
Pokud je vnitřní vlhkost 50% nebo nižší, může být užitečný zvlhčovač.
To bylo užitečné (299) Přečtěte si víceJaká je ideální vlhkost pro obytný prostor? Ověřeno
Ideální vlhkost v domě je mezi 40-60%. Při vyšší nebo nižší vlhkosti je pravděpodobnější výskyt plísní, bakterií a virů a může dojít k osobnímu nepohodlí.
To bylo užitečné (148) Přečtěte si více
Zapojte se do konverzace o tomto výrobku
Zde můžete sdílet, co si myslíte o Lanaform LA120123 Breva Zvlhčovač. Máte-li dotaz, nejprve si pozorně přečtěte návod. Žádost o příručku lze provést pomocí našeho kontaktního formuláře.