Manuál Kinzo Ecoline Vrtací kladivo

Manuál

3

A

3 PERSONAL SAFETY

a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a

power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal

injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source

and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or energizing power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power

tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from

moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection can reduce dust-related hazards.

4 POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do

the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the power tool before making

any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the

risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other

condition that may affect the power tools operation. If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account

the working conditions and the work to be performed. Use of the power tool for operations different from

those intended could result in a hazardous situation.

5 SERVICE

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

SPECIFIC SAFETY RULES

1. Hold tool by insulated gripping surfaces when performing an operation where the drillbit may contact

hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and

shock the operator.

2. Always use auxiliary handle for maximum control over torque reaction or kick back.

3. Use thick cushioned gloves and limit the exposure time by taking frequent rest periods. Vibration caused

by hammer-drill action may be harmful to your hands and arms.

4. Secure the material being drilled. Never hold it in your hand or across legs. Unstable support can cause the

drill bit to bind causing loss of control and injury.

5. Position the cord clear of rotating drillbit. Do not wrap the cord around your arm or wrist. If you lose control

and have the cord wrapped around our arm or wrist it may entrap you and cause injury.

71777 76067 manual.indd 3 31-12-10 15:53

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu Kinzo Ecoline Vrtací kladivo papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Kinzo. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Kinzo Ecoline Vrtací kladivo v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro Kinzo Vrtací kladiva
Další manuály Vrtací kladiva

Často kladené otázky o Kinzo Ecoline Vrtací kladivo

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

Hikoki D 13VL Vrtací kladivo

Manuál

Metabo SBE 850 Contact Vrtací kladivo

Manuál

Bosch EasyImpact 540 Vrtací kladivo

Manuál

Bosch EasyImpact 5700 Vrtací kladivo

Manuál

Bosch EasyImpact 5500 Vrtací kladivo

Manuál

Parkside IAN 337117 Vrtací kladivo

Manuál

Bosch GBH 2-26 DFR Professional Vrtací kladivo

Manuál

Narex EVP 13 H-2CA Vrtací kladivo

Související kategorie