Manuál Hikoki CS 30SB Motorová pila

Manuál

6

English

A moment of inattention while operating power

tools may result in serious personal injury.

b) Use personal protective equipment. Always

wear eye protection.

Protective equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal

injuries.

c) Prevent unintentional starting. Ensure the

switch is in the off position before connecting

to power source and/or battery pack, picking

up or carrying the tool.

Carrying power tools with your fi nger on the switch

or energising power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on.

A wrench or a key left attached to a rotating part of

the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times.

This enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts.

Loose clothes, jewellery or long hair can be caught

in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and off .

Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may aff ect the

power toolʼs operation.

If damaged, have the power tool repaired

before use.

Many accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed.

Use of the power tool for operations diff erent

from those intended could result in a hazardous

situation.

5) Service

a) Have your power tool serviced by a qualifi ed

repair person using only identical replacement

parts.

This will ensure that the safety of the power tool is

maintained.

PRECAUTION

Keep children and infi rm persons away.

When not in use, tools should be stored out of reach

of children and infi rm persons.

CHAIN SAW SAFETY WARNINGS

1. Keep all parts of the body away from the saw chain

when the chain saw is operating. Before you start the

chain saw, make sure the saw chain is not contacting

anything. A moment of inattention while operating

chain saws may cause entanglement of your clothing

or body with the saw chain.

2. Always hold the chain saw with your right hand

on the rear handle and your left hand on the front

handle. Holding the chain saw with a reversed hand

confi guration increases the risk of personal injury and

should never be done.

3. Hold the power tool by insulated gripping surfaces

only, because the saw chain may contact hidden wiring

or its own cord. Saw chains contacting a “live” wire may

make exposed metal parts of the power tool “live” and

could give the operator an electric shock.

4. Wear safety glasses and hearing protection. Further

protective equipment for head, hands, legs and feet

is recommended. Adequate protective clothing will

reduce personal injury by fl ying debris or accidental

contact with the saw chain.

5. Do not operate a chain saw in a tree. Operation of a

chain saw while up in a tree may result in personal injury.

6. Always keep proper footing and operate the chain saw

only when standing on fi xed, secure and level surface.

Slippery or unstable surfaces such as ladders may

cause a loss of balance or control of the chain saw.

7. When cutting a limb that is under tension be alert for

spring back. When the tension in the wood fi bres is

released the spring loaded limb may strike the operator

and/or throw the chain saw out of control.

8. Use extreme caution when cutting brush and saplings.

The slender material may catch the saw chain and be

whipped toward you or pull you off balance.

9. Carry the chain saw by the front handle with the chain

saw switched off and away from your body. When

transporting or storing the chain saw always fi t the

guide bar cover. Proper handling of the chain saw will

reduce the likelihood of accidental contact with the

moving saw chain.

10. Follow instructions for lubricating, chain tensioning

and changing accessories. Improperly tensioned

or lubricated chain may either break or increase the

chance for kickback.

11. Keep handles dry, clean, and free from oil and grease.

Greasy, oily handles are slippery causing loss of

control.

12. Cut wood only. Do not use chain saw for purposes not

intended. For example: do not use chain saw for cutting

plastic, masonry or non-wood building materials. Use

of the chain saw for operations diff erent than intended

could result in a hazardous situation.

Causes and operator prevention of kickback: (Fig. 2)

Kickback may occur when the nose or tip of the guide

bar touches an object, or when the wood closes in and

pinches the saw chain in the cut.

Tip contact in some cases may cause a sudden reverse

reaction, kicking the guide bar up and back towards the

operator.

0000Book̲CS30SB.indb60000Book̲CS30SB.indb6 2017/12/1513:42:492017/12/1513:42:49

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu Hikoki CS 30SB Motorová pila papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Hikoki. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Hikoki CS 30SB Motorová pila v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro Hikoki Motorové pily
Další manuály Motorové pily

Často kladené otázky o Hikoki CS 30SB Motorová pila

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

Hikoki CS 3630DA Motorová pila

Manuál

Hikoki CS 33EB Motorová pila

Manuál

Hikoki CS 30Y Motorová pila

Manuál

Hikoki CS 33EDP Motorová pila

Manuál

Husqvarna 135 Mark II Motorová pila

Manuál

EGO CS2005E Motorová pila

Manuál

Güde KS 18-401-30 Motorová pila

Manuál

Worx WG323E.9 Motorová pila

Související kategorie