Manuál Florabest IAN 56203 Travní sekačka

Manuál

12

GB

The rst cut is to be made in around April,

at a growth height of 70 – 80 mm. In the

main vegetation period, the lawn is to be

mowed at least once a week.

• Start mowing near the socket and

work away from the socket.

• Always keep the extension cable be-

hind you and when you turn, move it to

the side that has already been mowed.

• Run the equipment at a walking pace,

in tracks that are as even as possi-

ble. For gap-free mowing, the tracks

should always overlap by a few centi-

metres.

• Adjust the cut height so the equipment

is not overloaded. Otherwise, the mo-

tor may be damaged.

• On slopes, always work across the

slope. Take particular care when go-

ing backwards and pulling the equip-

ment.

• Clean the equipment after each use,

as described in the chapter on “Clean-

ing, Maintenance and Storage”.

Switch off the equipment after

work and in order to transport it,

disconnect the plug and wait until

the blade stops. There is a risk of

injury.

Cleaning, Maintenance

and Storage

Have work that is not described in

these instructions carried out by

a customer service centre that we

have authorised. Use only origi-

nal parts.

Wear gloves when handling the

blade.

Switch off the equipment before all

maintenance and cleaning work,

disconnect the plug and wait until

the blade stops.

There is a risk of injury.

General Cleaning and Mainte-

nance Work

Do not hose down the lawnmow-

er with water.

• Always keep the equipment clean. To

clean, use a brush or cloth but no de-

tergent or solvent.

• After mowing, use a piece of wood

or plastic to remove adherent plant

remains from the wheels, ventilation

holes, ejection hole and blade area.

Do not use hard or pointed objects, as

these may damage the blade.

• Oil the wheels from time to time.

• Before each use, check the lawnmow-

er for obvious defects such as loose,

worn or damaged parts. Check that

all nuts, bolts and screws are sitting

rmly.

• Check the covers and protective de-

vices for damage and check that they

are sitting correctly. Replace them if

necessary.

Changing the Blade

If the blade is blunt, it can be sharpened

by a specialist workshop. If the blade

is damaged or showing signs of imbal-

ance, it must be replaced (see chapter on

“Spare Parts”).

I

1. Turn the equipment over.

2. Use sturdy gloves and hold the

blade rmly (23). Turn the blade

screw (22) anticlockwise off of

the motor spindle (24) using a

screwdriver (A/F width13).

3. Install the new blade in the

reverse order. Ensure that the

blade is positioned correctly and

the screw tightened rmly.

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu Florabest IAN 56203 Travní sekačka papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Florabest. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Florabest IAN 56203 Travní sekačka v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro Florabest Travní sekačky
Další manuály Travní sekačky

Často kladené otázky o Florabest IAN 56203 Travní sekačka

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

Florabest IAN 61039 Travní sekačka

Manuál

Florabest IAN 292278 Travní sekačka

Manuál

Florabest IAN 43002 Travní sekačka

Manuál

Florabest IAN 79723 Travní sekačka

Manuál

Florabest IAN 70379 Travní sekačka

Manuál

Florabest IAN 273096 Travní sekačka

Manuál

Florabest IAN 79270 Travní sekačka

Manuál

Florabest IAN 102969 Travní sekačka

Související kategorie