Manuál EMOS E5201 Meteostanice

Manuál

4

Radio-controlled clock (DCF77)

After inserting the batteries into the sensor, it will automatically scan for DCF77 signal for 6 minutes and the icon

is ashing.

If the DCF signal is found, the

icon is displayed on the sensor display and a blue LED is displayed at the DCF

icon on the weather station display.

If the signal is not found, press the WAVE button under the battery cover of the sensor.

The sensor will again search for the DCF signal.

The current data will then be synchronised daily between 2:00 and 3:00 am.

DCF77 radio signal propagates via radio waves (77.5 kHz) from a site near Frankfurt in Germany within a range of 1500

km. This radio time signal automatically takes into account summer and winter time, leap years and date changes.

In normal conditions (at a safe distance from sources of interference, such as television sets, computer monitors) the

capture of time signal takes several minutes.

If the sensor does not detect the signal, follow these steps:

1. Move the sensor to another location and try to capture the DCF signal again.

2. Check the distance between the sensor and sources of interference, such as computer monitors or television

sets. It should be at least 1.5 to 2 m during the reception of the signal. When receiving DCF signal, do not put the

sensor to the proximity of metal doors, window frames and other metal structures or objects (washing machines,

dryers, refrigerators etc.).

3. In reinforced concrete structures (cellars, high-rise buildings etc.), the DCF signal reception is weaker, depending

on the conditions.

Reception of the DCF 77 radio signal is aected by the following factors:

• thick walls and insulation, basements and cellars

• inadequate local geographical conditions (these are dicult to assess in advance

• atmospheric disturbances, thunderstorms

• appliances with no disturbance elimination

• television sets and computers placed near the DCF receiver

Indoor and outdoor temperatures

Indoor temperature is displayed at the IN icon.

Outdoor temperature is displayed at the OUT icon.

Setting time manually

Press and hold the MODE button to go to the Setup Mode.

Adjust gradually:

time zone - year - month - day - hour - minute.

The values are set using the ▲/▼ buttons, followed by pressing the MODE button.

For a short change in displaying the clock/date/alarm time, press repeatedly the MODE button.

Daylight saving time will be indicated by a red LED at the DST icon on the weather station display.

Setting an alarm

1. Press twice the MODE button to go to the Alarm Setup Mode (ashing blue LED next to the alarm clock icon).

2. Press and hold the MODE button. The hour value starts ashing.

3. Use the ▲/▼ buttons to set the desired hour, conrm by the MODE button.

4. Use the ▲/▼ buttons to set the desired minute, conrm by the MODE button.

5. Press ▼ to enable/disable the alarm (blue LED next to the bell icon is lit).

Snooze feature

When the alarm is ringing, press the SNOOZE button on the top side of the station to enable the Snooze function and

to turn o the ringing alarm for some time (ashing blue LED next to the bell icon). The alarm will sound again in 5

minutes. To cancel, press any button on the front side.

Weather forecast

The station forecasts weather on the basis of changes in atmospheric pressure for the next 12-24 hours. The accuracy

of weather forecasts is 70-75%. Neither the manufacturer nor the seller can be held responsible for any loss caused

by an incorrect forecast. When you rst set or reset the weather station, it takes about 12 hours before the weather

station begins forecasting correctly.

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu EMOS E5201 Meteostanice papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat EMOS. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému EMOS E5201 Meteostanice v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro EMOS Meteostanice
Další manuály Meteostanice

Často kladené otázky o EMOS E5201 Meteostanice

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

EMOS E0300 Meteostanice

Manuál

EMOS E8468 Meteostanice

Manuál

EMOS WS330 Meteostanice

Manuál

EMOS ES9001 Meteostanice

Manuál

EMOS E5068 Meteostanice

Manuál

EMOS E8466 Meteostanice

Manuál

EMOS E0211 Meteostanice

Manuál

EMOS E6016 Meteostanice

Související kategorie