Manuál Elica Stripe BL/A/60 Connex Odsavač par

Manuál

filters.

Grease filter alarm (every 40 hours of use

approximately):

- with the hood switched off, by pressing any speed, the

keys T1+T2 light up for 10 seconds, indicating

maintenance of the grease filters.

- After carrying out maintenance on the grease filters, it is

necessary to reset by pressing keys T1+T2 for 2 seconds

while the alarm is displayed.

- The reset operation is confirmed if the LEDs of keys T1-

T2 flash quickly and then go out.

To deactivate the grease Filter Alarm function, proceed

as follows:

This alarm is normally active; to deactivate it, perform this

procedure:

with the hood switched off, press and hold keys T1-T2 -T3

at the same time: LEDs T1 T2 and T3 will light up with

different intensities from bright to soft; you will enter the

management menu of the grease Filter alarm, to

deactivate it press keys T1-T2 at the same time for 2

seconds.

Please note! The function is deactivated if T2 has LED

with a soft light; if the light of LED T2 is bright, the

operation must be repeated.

To reactivate the grease Filter Alarm function, repeat the

operation.

Activated carbon odour Filter Alarm (every 160 hours

of use approximately):

- with the hood switched off, by pressing any speed, the

keys T1+T3 light up for 10 seconds, indicating

maintenance of the activated carbon filters.

- After carrying out maintenance on the activated carbon

filters, it is necessary to reset by pressing keys T1+T3 for

2 seconds while the alarm is displayed.

- The reset operation is confirmed if the LEDs of keys T1-

T3 flash quickly and then go out.

Activation of activated carbon odour Filter Saturation

alarm.

This alarm is normally deactivated.

To activate it, proceed as follows:

with the hood switched off, press and hold keys T1-T2 -T3

at the same time: LEDs T1 T2 and T3 will light up with

different intensities from bright to soft; you will enter the

activation menu of the activated carbon odour filter

saturation indicator function, to activate it press keys T1-

T3 at the same time for 2 seconds.

Please note! The function is active if T3 has LED with a

bright light; if the light of LED T3 is soft, the operation must

be repeated.

- To deactivate the activated carbon odour Filter

Saturation function, repeat the operation.

MAINTENANCE WARNINGS

• Cleaning: For cleaning, simply use a cloth moistened

with neutral liquid detergents. Do not use cleaning tools or

instruments.

• Avoid the use of abrasive products. DO NOT USE

ALCOHOL!

For product maintenance, see the images at the

end of the installation marked by this symbol.

● Anti-Grease Filter: The metallic anti-grease filter

must be cleaned once a month with non-aggressive

detergents, manually or in a dishwasher on a short wash at

low temperatures. To remove the anti-grease filter, pull the

spring release handle.

• The Anti-Grease Filter traps the grease particles

produced during cooking. When cleaned in the dishwasher,

the metal grease filter may discolour, but its filtering

characteristics remain unchanged.

● Carbon filter (for filter version only): The

cartridge must be replaced at least every four months. It

CANNOT be washed or regenerated. As indicated in the

drawings section: remove the anti-grease filters, apply a

carbon filter on each side and attach it to the product. Put

the anti-grease filters back in place.

• The carbon filter retains any unpleasant odours produced

during cooking. • The saturation of the carbon filter can

occur after somewhat prolonged use depending on the type

of cooking and how regularly the grease filter is cleaned.

Illumination

• The lighting system is based on LED technology. LEDs

provide optimal illumination, last up to 10 times longer than

conventional lamps and save 90% of electricity.

●Lighting system : The lighting system cannot be

replaced by the user, contact Customer Service in case of

malfunction.

DE

Das Produkt ist für die Absaugung von Kochdämpfen

konzipiert und nur für den Hausgebrauch bestimmt.

Die in diesem Handbuch aufgeführten Anleitungen

müssen streng eingehalten werden. Es wird keine

Haftung für eventuelle Unannehmlichkeiten, Schäden oder

Brände am Produkt übernommen, die durch die

Nichtbeachtung der in diesem Handbuch angeführten

Anleitungen entstehen.

Das Gerät kann von den Zeichnungen in dieser

Broschüre abweichen, die Gebrauchs-, Wartungs- und

Installationsanweisungen bleiben jedoch unverändert.

• Es ist wichtig, alle dem Produkt beiliegenden Handbücher

aufzubewahren, damit sie zu jedem Zeitpunkt eingesehen

werden können. Im Falle von Verkauf, Weitergabe oder

Umzug ist sicherzustellen, dass sie beim Produkt

verbleiben. • Lesen Sie die Anleitungen aufmerksam durch:



Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu Elica Stripe BL/A/60 Connex Odsavač par papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Elica. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Elica Stripe BL/A/60 Connex Odsavač par v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro Elica Odsavače par
Další manuály Odsavače par

Často kladené otázky o Elica Stripe BL/A/60 Connex Odsavač par

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

Elica Lane WH/A/52 Odsavač par

Manuál

Elica Stripe WH/A/80 Connex Odsavač par

Manuál

Elica Rules BL/F/90 Odsavač par

Manuál

Elica Sweet P 85 Copper Odsavač par

Manuál

Elica Pandora N Odsavač par

Manuál

Elica Stripe 60 X Odsavač par

Manuál

Elica Elite 14 LUX Grix 90 X Odsavač par

Manuál

Elica Sweet P 85 A Peltrox Odsavač par

Související kategorie