Manuál Eldom BK100N Mixér

Manuál

USER'S MANUAL

R

BLENDER BK100N

3

1

B

1. Cap + measuring unit

with the volume of 30ml

2. Cover

3. Jug with the volume of 1.5l

4. Holder

5. Body

6. Control switch

CUTTING UNIT

A. Knife

B. Seal

C. Base

- power: 400W

- supply voltage: 230V ~ 50Hz

- allowable time of continuous

work: 60 seconds

- interval before restarting

work: 2 minutes

Before the first usage, one shall wash all the parts of the blender which come in contact with food, that is: a

cap (1), a cover (2), a jug (3) and a cutting unit (photo 2).

- in order to disassemble the cover (2) one shall turn it clockwise and slide out. The cap (1) which is located

in the cover shall be disassembled in an analogical way.

- in order to disassemble the jug (3) one shall turn it clockwise and slide out while holding

the holder (4)

- for the purposes of washing, the cutting unit which is located on the bottom of the jug (3) shall also be

disassembled. It shall be turned anti-clockwise and slid out (photograph 4). It is not allowed to immerse the

cutting unit in total in water. Before the reassembly, all the elements have to be dried completely.

SERVICING

- make sure that the appliance is disconnected from power network and the switch (6) is set in „0” position

- the body (5) has to be placed on a flat and stable surface

- assemble the jug (3) together with the cutting unit. The jug (3) has to be placed on the body (5) and turned

anti-clockwise (photograph 5)

The appliance is equipped in a device which protects it against starting it without the properly seated jug (3).

In case of problems with starting the blender, it is necessary to check whether the above mentioned element

is appropriately assembled.

- place food products in the jug (3). The maximum allowed level is marked on the jug (MAX).

In order to avoid splashing it is recommended not to exceed the volume of 1.2 l.

- place the cover (2) on the jug (3) and block it by means of turning it anti-clockwise

- put the cap (1) into the opening in the cover (2) and block it by means of turning it anti-clockwise

- connect the appliance to power

- depending on the products processed, select with a switch (6) low or high speed (item 1 or 2)

- in order to turn on impulse work, one shall turn and hold the switch (6) in „P” position.

After releasing the switch it automatically goes back to „0” position.

After completing work one shall set the switch (6) in „0” position, disconnect the appliance from network and

wait for the knife (A) to stop.

2

4

5

6

A

C

PHOTOGRAPH 1

PHOTOGRAPH 2

PHOTOGRAPH 3

GENERAL DESCRIPTION

TECHNICAL DATA

USING THE APPLIANCE

5

Hodnocení

Více o tomto návodu

Chápeme, že je hezké mít k vašemu Eldom BK100N Mixér papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat Eldom. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému Eldom BK100N Mixér v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Všechny návody pro Eldom Mixéry
Další manuály Mixéry

Často kladené otázky o Eldom BK100N Mixér

Náš tým podpory vyhledává užitečné produktové informace a odpovídá na často kladené otázky. Pokud v nich najdete nějakou nepřesnost, kontaktujte nás prostřednictvím našeho kontaktního formuláře.

Související produkty

Manuál

Eldom BK2S Mixér

Manuál

Braun JB 1050 BK PowerBlend 1 Mixér

Manuál

Tefal BL1C0430 Mixér

Manuál

Trisa Vario Power Mix Mixér

Manuál

Electrolux E6TB1-6ST Explore 6 Mixér

Manuál

SilverCrest IAN 483358 Mixér

Manuál

Philips HR3031 Mixér

Manuál

Rohnson R-5343 Mixér

Související kategorie