Manuál EGO ST1500E-F Strunová sekačka

Potřebujete manuál pro svůj EGO ST1500E-F Strunová sekačka? Níže si můžete zdarma prohlédnout a stáhnout PDF manuál v češtině. Tento produkt má aktuálně 0 často kladené otázky, 1 komentář a má 0 hlasů. Pokud toto není manuál, který chcete, kontaktujte nás.

Je váš výrobek vadný a manuál nenabízí žádné řešení? Přejděte do Repair Café a získejte opravu zdarma.

Manuál

Loading…

56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER — ST1500E-F10
EN
MOUNTING THE GUARD
WARNING: Always wear gloves when mounting or
replacing the guard. Take care of the blade on the guard
and protect your hand from cutting.
WARNING: Never operate the tool without the
guard rmly in place. The guard must always be on the
tool to protect the user! When the guard is xed, never
attempt to remove or adjust the guard, if a replacement
is needed, it should be performed by a qualied service
technician!
1. Lift the trimmer head and face it downward; align the
two mounting holes in the guard with the two bolts that
are preassembled on the base of the shaft (Fig. B) .
2. Use the supplied hex wrench to lock the guard in place
with the two bolts (Fig. C).
Make sure the guard is xed according to Fig. B & C, any
reverse xing will cause great danger!
MOUNTING AND ADJUSTING THE FRONT-ASSIST
HANDLE
Push the front-assist handle onto the shaft (Fig. E), then
insert the clamping block into the handle slot (Fig. F), mount
the lock pole, and lock them with the wing nut (Fig. G). The
sequence is as Fig. D shown. Lastly, adjust the front-assist
handle between the soft sleeve and the label to make sure
your front arm is straight when using the trimmer (Fig. H)
and then lock the lever of the lock pole (Fig. I).
Fig. D & H parts description see below:
D-1 Front-assist Handle D-4 Wing Nut
D-2 Lock Pole H-1 Soft Sleeve
D-3 Clamping Block H-2 Warning Label
NOTICE: The front-assist handle should be turned
upwards to point toward the top of the rear handle.
WARNING: Only x the front-assist handle between
the soft sleeve and the label on the shaft.
WARNING: The tool can not be used without the
front-assist handle securely xed.
MOUNTING THE SHOULDER STRAP
1. Loosen and remove the bolt in the hook of the strap
(Fig. J & K).
2 Attach the hook onto the shaft as Fig. L shown and
lock it with the bolt (Fig. M).
WARNING: Only x the hook of the strap between the
housing and the soft sleeve on the shaft.
OPERATION
WARNING: Do not allow familiarity with this
product to make you careless. Remember that a careless
fraction of a second is sufcient to inict serious injury.
WARNING: Always wear safety goggles or safety
glasses with side shield, along with hearing protection.
Failure to do so could result in objects being thrown into
your eyes and other possible serious injuries.
WARNING: Do not use any attachments or
accessories not recommended by the manufacturer of
this product. The use of attachments or accessories not
recommended can result in serious personal injury.
WARNING: To prevent serious personal injury,
remove the battery pack from the tool before servicing,
cleaning, changing attachments or removing material
from the unit.
You may use this product for the purposes listed below:
Trimming: used for removing grass and weeds up against
walls, fences, trees and borders.
Cutting: used for cutting the grass that is difcult to
reach using a normal mower.
NOTICE: The tool is to be used only for its prescribed
purpose. Any other use, for example edge trimming, is
deemed to be a case of misuse.
ATTACHING/DETACHING THE BATTERY PACK
Fully charge before rst use.
To Attach
Align the battery ribs with the mounting slots and press the
battery pack down until you hear a “click” (Fig. N).
To Detach
Depress the battery-release button and pull the battery
pack out as Fig. O shown.
HOLDING THE LINE TRIMMER
WARNING: Dress properly to reduce the risk of
injury when operating this tool. Do not wear loose
clothing or jewelry. Wear eye and ear/hearing protection.
Wear heavy duty, long trousers, boots and gloves. Do not
wear short trousers, sandals or go barefoot.
Before operating, stand in the operating position and
check for eye protection, proper clothing, balanced foot-
ing, straight arm, which holds the front-assist handle.
Stáhnout manuál v český (PDF, 38.67 MB)
(Zvažte dopad na životní prostředí a tento manuál si vytiskněte pouze v případě, že výtisk skutečně potřebujete)

Loading…

Hodnocení

Ohodnoťte EGO ST1500E-F Strunová sekačka a dejte nám vědět, co si o výrobku myslíte. Chcete se podělit o své zkušenosti s tímto výrobkem nebo se na něco zeptat? Nechte nám ve spodní části stránky komentář.
Jste spokojeni s EGO ST1500E-F Strunová sekačka?
Ano Ne
Ohodnoťte tento výrobek jako první
0 hlasy

Zapojte se do konverzace o tomto výrobku

Zde můžete sdílet, co si myslíte o EGO ST1500E-F Strunová sekačka. Máte-li dotaz, nejprve si pozorně přečtěte návod. Žádost o příručku lze provést pomocí našeho kontaktního formuláře.

joris langouche 07-06-2020
velká spokojenost, zatím bez problémů

odpověď | To bylo užitečné (0) (Přeloženo Googlem)

Více o tomto návodu

Chápeme, že je hezké mít k vašemu EGO ST1500E-F Strunová sekačka papírovou příručku. Manuál si můžete vždy stáhnout z našich webových stránek a vytisknout si jej sami. Pokud byste chtěli mít originální příručku, doporučujeme vám kontaktovat EGO. Možná by byli schopni poskytnout originální návod. Hledáte příručku ke svému EGO ST1500E-F Strunová sekačka v jiném jazyce? Vyberte si preferovaný jazyk na naší domovské stránce a vyhledejte číslo modelu, abyste zjistili, zda jej máme k dispozici.

Specifikace

Značka EGO
Modelka ST1500E-F
Kategorie Strunové sekačky
Typ souboru PDF
Velikost souboru 38.67 MB

Všechny návody pro EGO Strunové sekačky
Další manuály Strunové sekačky

Manuál EGO ST1500E-F Strunová sekačka

Související produkty

Související kategorie

×
Download